BLADES

WATER   PROOFING

Home

About Us

Contact Us

Credit Application

Employment

Map To Us

Products

AZEK DECK
Cabinets
Electrical
EL & EL
Hardware
Honda
Lumber
Masonry
Milling
Paints
Plumbing
Roofing
STIHL
Stone Veneer
Tools
USP
Water Proofing

AMES· GRACE ICE & W.S.· PROTECTO WRAP· HENRY· THROUGH THE ROOF· LIFE· FORTIFIBER


Block Wall Blue Max Safe-T-Deck Super Elasto Barrier Iron Coat Liquid Granite Peel & Stick Seam Tape

TOPAMES Product Page


Grace Vycor® Plus Self-Adhered Flashing™
Grace Vycor Plus provides premium exterior protection against water, air and moisture leaks. I works by sealing a wall's vulnerable spots, such as window and door openings, corner borards, under stucco finishes, masonry walls, decks and other flashing areas. It is designed to work in severe winter climates, milder climates and in coastal areas where wind-driven rain is common. Compatible with wood, plywood, concrete and masonry, it fully adheres to the substrate to prevent water from passing through. The product is 25 mil thick and available in 75-foot rolls in widths of 4, 6, 9 and 12 inches.

Grace Vycor® Deck Protector™
With the use of new and more corrosive wood preservatives, there's a new problem on deck, Corrosion, Grace Vycor Deck Protector helps decrease the corrosion rate of galvanized connectors and fasteners in contact with these new pressure-treated wood preservatives.
Even with today's treated and high-tech decking products-which look great and last and last preventing joist rot decay, as a result of water accumulation under the decking boards, remains a major problem. Grace Vycor Deck Protector is a unique solution to significantly extend the useful life of decks.

Grace Ice & Water Shield® Roofing The leading self-Adhere roofing underlayment, Grace Ice & Water Shield offers premium leak protection for sloped roofs in climates subject to ice dams and wind driven rain. It is applied to the roof deck prior to the application of the finished roof covering, which is most often shingles but can be tile or metal. The membrane goes under shingles and seals around nails that hold the shingles in place, so water that doesn't drain properly cannot penetrate the roof. It also creates a weather-tight barrier against wind-driven rains that cause shingles to lift and leak. Affordable and easy to install, it provides added pease of mind for many years, even in the most brutal winters.

TOP

Sizes: 6"x100'   9"x100'   12"x100'

Sizes: 6"x75'    9"x75'


TOP

107 Asphalt Emulsion

  • Versatile Protective Roof and Waterproofing Coating
  • Best-value, all purpose
  • Use with Henry 195 or 196 polyester for complete roor restoration
  • Solvent-free, non-fibered black asphalt
  • Waterproof, non-alligatoring
  • Coat composition, metal and smooth-surface built-up roofs
  • For concrete, masonry, steel tanks
  • ASTM D1227 Type 111, Class 1
  • Coverage:3.0 gallons/square per coat
  • Stock Sizes: 5 gallon
  • Sizes Available for order: 50gal, 55gal, 275gal

204 Plastic Roof Cement

  • Trowel-grade for use on DRY surfaces
  • Spreads easily in cold weather
  • Repairs holes, cracks, splits on asphalt coated, composition and metal roofs
  • Seal around chimneys, vents, skylights, flashings
  • Ideal for filling flashing pans around roof penetrations
  • Heavy-bodied, smooth-spreading
  • Doesn't slide/slump in hot weather
  • Tough, long-lasting flexible film
  • Will not run or sag in the hottest weather
  • Meets or exceeds all requirements of ASTM Specification D-4586, Type 1
  • Stock Sizes: 1gal
  • Sizes Available for order: 3.5gal, 5gal

208 Wet Patch Roof Cement

  • Repair leaks on WET surfaces
  • Adheres even under water
  • All purpose-also suitable for dry surfaces
  • Spreads easily in cold weather
  • Seal around Chimneys, vents, skylights, flashings
  • Heavy-bodied, smooth-spreading
  • Meets or exceeds all requirements of ASTM Specification D-586, Type 1
    except for high temperature sag.
  • Stock Sizes: 11oz. cartridge, 3.5gal

203 Cold-Ap Roof and Lap Adhesive

  • Use to bond layers of conventional, BUR, or SBS base and cap sheets (not APP)
  • Replaces hot asphalt in BUR
  • Used to seal laps and seems
  • Greater cold-weather flexibility
  • Allows longer working time
  • For embedding polyester fabric, gravel, granules
  • Not recommended for saturated felt
  • Apply with brush, roller or squeegee
  • Not for use over solvent-sensitive insulation
  • ASTM D3019 Type 111
  • Coverage:2gallons/square
  • Stock sizes: 1gal
  • Sizes available for order: 5 gal, 55gal

532 Driveway Asphalt Resurfacer

  • Easy Stir Gel Formula
  • 7X Rubberized for longer life and duability
  • Fast drying, reduces tracking
  • Fills and seals rough surfaces and cracks
  • 7-Year Stay Black guarantee
  • Coverage: 250-500sq.ft/5gallon pail depending on surface texture.
  • Stock Sizes: 4.75 gallon

TOP

TOP

8875 Elastomeric Waterproofing Underseal

  • Finish: Low angular sheen
  • Stock Sizes: 1gal, 5gal
  • Color: 8875 Black and 8876 Tan
  • Primes and seals
  • Resists ponding water
  • Creates a water barrier
  • Resists cracking
  • Outstanding tensile strength
  • Superior flexibility at extremely low temps
  • 800% elongation with excellent recovery properties

8840 Premium 100% Acrylic “Ceramic” Elastomeric Roof Coating

  • Reduces interior temperatures up to 20%
  • Stock Sizes: 1gal, 5gal
  • Up to 30% energy savings
  • Resists ponding water
  • Extends Roof Life
  • Infused with “Ceramic Spheres” to add durability and insulating value
  • Class A (ASTM-E-108) Fire Rated Coating
  • Easy water clean up
TOP

TOP

W

A

T

E

R



P

R

O

O

F

I

N

G



P

R

O

D

U

C

T

S

W

A

T

E

R



P

R

O

O

F

I

N

G



P

R

O

D

U

C

T

S

W

A

T

E

R



P

R

O

O

F

I

N

G



P

R

O

D

U

C

T

S

© Copyright Roadside Lumber & Hardware, Inc. www.roadsidelumber.com